Extreme Flight 48" MXS EXP V2__A Look At The Kit

This is just a convenient place to post pictures of my new Extreme Flight 48" MXS V2 kit Extra EXP V2. For now you can see some of the features up close and how nice the kit is, because it's really super nice. Later I'll run a build and set up article, and follow up flight report with video in a day or two.

October Video Wrap Up

Holy cow the last few years have been brutal. There have been so many new 48"-60" Extreme Flight releases lately that it's been a tough go just to keep up. Some of this was with clean sheet brand new designs like the Velox and Gamebird, and some have been V2 versions of beloved old favorites like the 48" Extra and Edge, and 60" Edge and MXS. Also remember we just went through building, flying and reviewing the 52" Lineup, so things have been pretty crazy. When you factor in I usually built two of everything,  my shop has really been hopping. 

 Between building, videoing and reviewing, a lot of my old favorites haven't gotten a lot of love, and certainly not as much as they deserve. We've had a little lull in the action when it comes to new releases, so coupled with the beautiful October Florida weather, this was a good opportunity to catch up on flying, and especially with the 60" Edge V2, snag some footage.

52" Extra EXP

We've had Extras for so long that they are the plane people often take for granted. We've all got one, but the latest and greatest shiny new plane is what we usually want to take out. This ends up being a mistake since the Extra flies as well as any of them. 

      Extreme Flight Extra__No Title.mp4 from Doc Austin on Vimeo.

I've been flying the 48" Extra V2 so much I kind of forgot about my 52.  Finally I took it out to blow the dust off it and fell in love with it all over again.

Any time you go flying you learn something and hopefully get better. Some of the stuff I have been working on really came to life when I tried it with this plane. This particular plane is about four years old, and doesn't owe me me a dime. She met her demise shortly after this due to a systems failure, and I am definately going to replace her as soon as they are restocked.

52" Slick EXP

Here's another one I will probably never get to fly enough. It's very similar to the Extra, and while it's not quite as graceful as the Extra, it does tumble a bit better and harriers a little more solidly. To, me, this and the 52" Extra are so dead even on everything else it almost doesn't matter which one you choose. However, the Slick is way ahead on "cool factor." 

Slick EXP__Before The Storm.mp4 from Doc Austin on Vimeo.

60" Edge V2
Here is another sadly underutilized plane from my fleet. Last year we got so many new releases I barely had to build it and get a video or two before the 60" MXS V2 came out. With the holidays coming and all, there was just no time to do it proper justice, but we're catching up on that now. Mostly I feel guilty flying this plane because it's so smooth, stable, honest and easy to fly that it really is the unfair advantage.

Edge V2__Top Of The Food Chain.mp4 from Doc Austin on Vimeo.

60" MXS EXP V2
A little cheating here because we shot this in September, but hopefully a good representation of how much I like this plane. All the latest stuff is nicer than ever, but the MXS is just even better. Everything was so well done the plane fell together seamlessly and was an absolute joy to set up.

I have a special connection the the MXS and have always loved this plane, but the V1 was starting to look a little dated. Along with the V2 construction and the beautiful new color scheme, this is currently the nicest plane I have ever owned. Some of this assessment could be sentimental too, but clearly this is one super damm nice airplane.

3DHS Velox Revolution__Long Term Product Evaluation

We're two years in, which I didn't expect. Usually when I have a plane I can lean on at 110% every second, I tear up one or two. It's just part of the game when you take such high performance stuff and try to break it. So far I've treated this plane extremely poorly and it's like a hot chick you can't run off no matter how big of a butthole you are to her. She loves you even when you're a bad man! I had a girlfriend like that. It ended badly! Of course, I do treat my real bride far better.

There was one nasty moment that I dead stalled it in a death slide (which it does really well when you hit it right) and dropped it straight in on a wing tip. The impact pushed one side in a little, and cracked a few formers. I pushed it back into place, and with a few little braces and CA it's probably even stronger than when it came out of the box. There's one little boo boo on the side, but if I didn't tell you about it you'de never see it. Still, that sort of thing usually makes me crazy enough to replace a plane (blame OCD). but this one flies so exceptional there was never a thought of that. Oh, hell no. This plane is too good for that.

The V2s are incredibly tough planes. Just today a friend landed a 48" Extra V2 in a tree. The wind blew it out just as we were walking up to it, and it fell a good 20 feet straight onto the spinner. Ka-blammo! It cracked the motor box top piece inside the battery compartment and broke a hinge (next time use Radio South), but he just called and he's already got it fixed. Super light but built like an anvil.

The Great Rethink

Initially I did the Velox a disservice by titling our first article "3DHS Velox__Return Of The Wild Child." We did that because the original was so wild, but nothing could be further from the truth on the new one. It's not wild at all. Performance is off the chart, but not wild or even close. It's a very calm and composed plane that I think would make a great entry level 3D trainer provided you have a good background in conventional aerobatics, which you need anyway before you get to 3D.

Part of my original mischaracterization came from initially missing the set up. My radio only has two rates, so I skipped the "3D" rate and went with low and "insane." Insane is just that and not even necessary.  Overkill is not usually a bad thing, but for me it was on this plane. 

Now if you want something completely wild that will challenge you every second, that insane rate is, well, insane.

With the 3D rate the plane is so good I don't miss the insane, and two rates instead of three is one less thing for the pilot to get wrong. We had to shoot video instead of tinkering with the plane, but I knew there was a different airplane in the set up. That stability was such a strong suit on this plane I wanted to set it up to get it all. This was virtually the same lesson I learned with the Gamebird and I knew exactly what I wanted from this plane.

I knew instantly on the maiden this is the most stable plane I have flown since the Gamebird, which flies essentially like a big Velox. While all of the good things of the old Velox are still there, all the rough edges have disappeared on the new one. The new one is so refined that it may as well be a completely different plane, and it really is.

But we already had the answer in our hands and that's the manual. With only two rates I knew I had to have low for precision, and with the insane not what I was after, the 3D rate was the logical starting point, and eventually the end. I took the 3d rate and never looked back.

That, and it's always great to get a look at Ashley. 

And it's always a good time to make fun of Ken.

Which means we start from scratch and judge it by it's considerable merit instead of what it used to be. Oh, the old one was great, but you had better know what you were doing with one. Now the new Velox is one that you don't need to be really good to handle proficiently. I'de say a competent sport pilot can pick one up and fly it on low rates just like he would a regular old T28 or something, but the performance is nearly as good as the original just by flipping to high rates, and I believe from there it would be supremely awesome from basic 3D training, right up to anything you can throw at it.

Now it's so easy to push hard that you really need to check a little bit of your confidence because you will feel invincible. Sure it performs like a monster, but when you calm things down planes don't get any easier or more friendly to fly. 

We're kind of out of order here, but we don't have today's video cooked just yet. Here's the first flight on first day out with the 3D rate. You can see the plane was so much improved that my confidence in it was just short of magical. The conditions were really horrible with blasting wind gust and high wind the rest of the time, but the Velox is so stable it remained completely unfazed. 

This might just be one of my own top two or three videos, just because it was the beginning of a great romance between the Velox and me. I got away with some stuff I have never tried before and never came close to a mishap, even pushing past my own limits and in horrible conditions. That tells you right there how exceptional this plane is. Past the limit in bad conditions and she stayed right with me.

3DHS Velox__Doc Austin's Day Off from Doc Austin on Vimeo.

I'm going to keep writing, but a little later in this article we will have today's video where I fly it around like a normal person and show you the stupid crazy stability and ease of flight. The Velox' laid back nature when flying it easy is simply astonishing.

It is worth nothing that today everyone dropped what they were doing and lined up along the fence whenever the Velox went up. We were doing something a little different and I think they were all shocked that such a high performance aircraft would fly in such a gentle manner. Either way, everything else aside, the Velox draws a big crowd just because it's so cool and badass looking. I've taken it to an event and I got lots of positive comments about it. I've also let a few people fly it and they now have their own. The flying doesn't lie.

Set Up

No secrets here other than go with the manual. I have found that the "insane" super high rate is not necessary nor even desirable unless you just want to tumble the thing into orbit. It's too nice of a plane for that anyway, but going to the middle "3D" rate is more than good enough for anything you want to try with it. It's much smoother and easier to handle with the 3D rate. My TX only has two rates anyway, so I go with the low rate and 3D rate from the manual and it's absolutely perfect.

I do deviate a little by setting my low aileron rate to three rolls in five seconds at full speed. This is fast enough that the plane doesn't have time to drop much when you are waiting for it to come around, but slow enough any sport pilot can easily keep up with it. This would even make a superb dedicated sport plane for those who want a great flying, cool looking sport plane, and the option is always there to flip to high and start a new adventure.

The big difference is this is a short coupled plane, which generally means it's very responsive to pitch input. As such you only need about 45 degrees of elevator. I'm at 50, but would have to make a mechanical change to drop to 45. I'm so happy with the plane I'm leaving it alone, but shoot for 45 and 50 is still really solid. Like this it responds like most of the other Extreme Flight planes, but it does seem a bit more locked in on pitch, which I simply can't explain. This plane simply should not be this good, but after two years with it, I still never get enough.

To summarize, I run the low rate from the manual with the ailerons turned down 3 or 4%, and the 3D rate word for word from the manual, except, that is, the extra 5 degrees I am too lazy to take out of the elevator. As far as the aileron low rate, you want three rolls in five seconds at full speed. That's fast enough that the plane won't drop much as it's coming around, and slow enough that you can keep up with it...essentially just right. You can jam the ailerons over and with a tiny touch of down and up can crank off three rolls like they are on a string. It will make you look good.

Remember, the manual is always the best place to start, and unless you need something way different from the rest of us, you'll probably never change it.

You can see my set up photos and learn about the plane in general on  52" Velox Revolution__Return Of The Wild Child

Exemplary Harrier

Here's the real key to any good plane, and especially one used for training. Harrier skills are where it all begins, starting by mastering the elevator drop, and then with a little power moving it forward it becomes a harrier. Once you get to where you can nearly set it down in an elevator or harrier landing, from there you just pull the nose up and your hover will be nearly there.

Granted, not easy for the new guys, but the more you practice the easier it gets, and becomes so much fun you won't want to do anything else. It also helps to do routine harrier practice every time out, but I don't mind anything that makes me fly better, especially if it's fun to do anyway.

But this is the Velox' turf we are on here. I haven't flown anything that has such a strong, smooth, locked in harrier (except the Gamebird). Most people would tell you Edge has the advantage here, but the overall character and 99% of the Edge's harrier manners is still a jolly solid plane.

This is why I think it would make a good first 3D plane. It may not exactly be a true 3D trainer, but I fly it like that. In the old days I learned on a 3DHS Extra SHP. That was the most happy-go-lucky thing I have ever flown, and I regard the new Velox as my Hyper SHP. Still happy, still go lucky, but with blinding performance.

It's just nothing but solid and reassuring. The reason I suggest you be a competent sport pilot is because it is still an very agile plane, and you tame that by using the expo numbers, again, straight from the manual, which is gold.  Maybe the Edge would be a little better, maybe not, but the Velox pegs the cool scale.

Some of this comes from running a big 15" prop because holding a little power on blows enough air over the plane to not only keep it up in the air, but also feeds the control surfaces and keeps you in control. Post stall manners are otherworldly, and that's how you are going to be able to describe your confidence after you have a few flights on one.

Smooth Precision

Precision really was the big surprise because for long, sleek lines you want a long plane. The Velox is short coupled, so conventional wisdom is that it would suffer in big sky stuff. It doesn't Not at all. I'de say if it gives up anything at all to a longer plane like the Extra, it's a percent or two and not worth worrying about. In the end, maybe there was a little, but you get used to the plane, adapt and fly it as precisely as you would an Extra. 

The Velox really does absolutely everything exceptional well and cleanly.

Here's today's junket of video. In the first we just putter around and relax with the plane. I would guess I had backed off to about 60% of balls out, but that allowed me to hit my marks better and just have some fun.

3D Hoby Shop Velox_Too Much Fun.mp4 from Doc Austin on Vimeo.

There's actually a lot to be said for backing off on the intensity to get a good, smooth flight. The plane is so stable I can still fly hard and not have much trouble, but backing off a little gives you a more composed presentation. If you're trying to showcase a plane's stability and precision this is a pretty good technique. When you start pushing really hard it's easy to get sloppy, either from adrenalin or just skirting your own personal limit. That's ok on an agility video because crazed flying is always fun to watch too.

Today was a good lesson on backing off and giving a more balanced flight. I'm not going to abandon the wild stuff, but I will be incorporating more sedate flying that the new guys won't be afraid to try, and that's who we want to help most anyway.

Here we go a little off script, and I fly the plane really hard, though with a bit more margin, and taking the time to set everything up better, and manage the flow. I just slowed it down a little to take my time and get it right. I blow a couple of exits, but the wind was really howling, and maybe I relaxed too much and got sloppy.  In general I think it is a different style and looks better in it's own way. It's a different look from all out gonzo, but if it makes the presentation look better and it's more fun, this is more the way I'm going to fly this plane.

3D Hoby Shop Velox_Too Much Fun 002.mp4 from Doc Austin on Vimeo.

The new Zonker

What else are you going to call a plane that looks like it's on fire when it goes by? I couldn't choose, so I got both. As of now, this plane has only five flights on it. The blue might be getting all the love, but the yellow s going to stay pristine and perfectly dialed in for when I need it.

 The video here is a little dark, but the sunset was cool and I found a beautiful soundtrack for it. It's darker than it looks. I was fighting to see the plane, but the yellow really helped here. 

   

3DHS Velox__3DHS Velox__Doc Austin's Day Off 4 from Doc Austin on Vimeo.

Let's be clear here about one thing. This is a 100% blood and guts old time rock and roll 3DHS fly low plane all the way. It may be a Velox, but it's character and soul has the deep running roots of the original Extra SHP, and especially the SR. Most of us grew up flying those planes, and in honesty, they made me into a pilot.

From here how do you summarize a plane that defies the conventional wisdom that you have to sacrifice something to get something? OK, maybe the Velox gives up a percent or two to the Extra in grace, and maybe the Edge is a percent easier and more stable, but it's so close any intermediate pilot can make up that difference after a flight or two. The Velox does everything sparklingly well, and it's performance bias, while a little different, rivals the Extra for being the best rounded plane in the lineup.

Finally a note of thanks to Ben Fisher for his patience and guidance from the early years. I didn't know jack about set up, but he brought me along and many, many of the things I instinctually applied on this project comes directly from what I learned from him. He designs a pretty mean plane too.

That, and the Boss rocks.

Finally, and this time for real, for cell users YouTube seems to work better for cell phones or slower connections, so we will give it a try. For this video, you will want to crank the sound.

                .     

Setting up an Aura for sport 3D

Electronic Stability Systems (ESS) are becoming less of a novelty and more of just a piece equipment that allows you to get the most out of the airplane. I run Auras in everything I own, simply because the planes fly better and I crash less. Every Aura I own has paid for itself over and over, so to me this makes them essential. You  don't actually need one, but if you fly in a lot of wind or are not a top level professional pilot, you'll get better results with one.

Generally an ESS just stabilizes the plane. A good system can level the playing field between super stable planes and ones that sacrifice a little stability to get agility. For example, a 48" MXS is a great little plane, but it's so agile you have better know what you are doing if you're going to hammer it hard. This kind of goes away with a stability system because that plane becomes an utter pussycat without giving up any agility. On that plane the transformation was mind blowing. 

One odd thing I discovered is that as you go smaller, the ESS makes a bigger difference. On 60" planes the ESS makes the plane smoother and, of course, more stable, but on a 52" the difference is very, very noticeable. On a 48" it's pure utter magic on a biblical scale. My first ESS was on a 52" and I fell in love with it immediately, but on a 48" it was like flipping a light switch. Conversely, on a 74" or 92, the effects are more subtle.

So, the smaller you go, the more improvement you get, to the point size becomes largely irrelevant, at least from a stability standpoint. The beauty here is that on a small plane you get big plane stability without giving up any of the smaller plane's agility.

Disclaimers
First we have to get the disclaimers out of the way. People often want my config file, but that is problematic unless you fly Futaba. Also, I  can't put myself in a position of liability, so I am loathe to share them. My formula is so simple you won't have much trouble anyway.

However, my formula for gains and stick priorities work on every system I have tried, so that's what we will focus on.

I fly 48" to 60" planes exclusively, so if you are flying something bigger you might be able to up the gains a little and get away with it. I've tried this formula on friends 74" and 104" plane with good results, but I won't have a definitive formula for bigger planes until I have my own to tinker with, or just a lot of time experimenting with someone else's expensive toy. You don't keep your friends if you crash a lot of their planes, and volunteers are kind of rare, so this could be awhile!

No report is complete without a smokin' video. Here we combined the Velox' smooth precision with nice weather and a great anthem. Make sure you crank it up!

   

MY CONFIG
When you go into the Aura config tool, look for file/new Aura Config file Wizard. From there, choose "custom airframe" and the "generic 3D" template. For most people that's a great place to start and you might just be happy with it the way it is.

However, be aware that at high speed and high mode (gain) the plane will shake itself into orbit and pieces will probably start blowing off. If you are good at switch flipping and remember which mode you are on, this won't give you a problem, and it works for most people.

I go a slightly different route in separating my rates, expo and mixes from the Aura  and run those in the TX. That way those are independent from the Aura and work like they normally do. Then I run only an off/high/high Aura setting. Off is off, and the two highs are identical. I trim the plane, turn the gyro on and never think about the Aura ever again. Essentially, we fly the plane just like we always have with a choice of rates on your dual/triple rate switch, and that's it. The gyro gains and stick priorities are the same all the time, and I'm too busy flying the plane to worry about it. It's just one less thing for the pilot to get wrong, and this is especially important for the new guys who are struggling with everything else. 

Simplicity counts.

Get the Aura wired up and everything working. Then you can change servo direction and sub trims in the Aura. If you can get that far, the rest is cake.

GAINS

Gains are basically the amount of assist you ask from the gyro. Different people want different things, but you do have to be careful not to run too much.

There's a lot to consider here, but we're going to keep it simple. If you run too much gain at speed you get into gyro shake. This looks almost exactly like you would expect from high speed flutter, and it can be catastrophic. If nothing else it can be so violent you lose control and bury the plane, while parts blow off, that is.

You also want to be wary of getting the gains working the right direction, There are clear directions on this in the manual, but in general, if you drop the nose the gyro should add up elevator, raise a wing and that aileron will go up. Yaw is a little more difficult to check because it's visually difficult, but yaw the plane one way and the rudder should go the opposite way. Again, get this right the first time unless you enjoy tearing up a good plane.

On all of my Extreme Flight planes, this is usually not a problem. On the set up page there is a picture of the gyro in the plane in the proper orientation for most Extreme Flight planes, so start with that and everything should be golden, However, make sure you check gyro direction over and over.

Backwards gains is fatal every single time. I think it's even worse than a reversed control. Therefore, the #1 rule for any new installation or after any gyro adjustment is trim the plane with the gyro off, and turn it on with plenty of altitude. You might think you can catch it, but a reversed gain puts the plane in the ground really fast, so probably 200-300' is a good place to start. If the plane is whack, turn the gyro off, land and correct. It's important you put your gyro mode switch where you can find it fast. First time out you may want to have a spotter who can do it for you.

Don't mess around with this. I've tested a few planes with the gains backwards (before I knew much about gyros) and it's the quickest way to trash a plane I can think of. Fortunately I knew where the switch was and turned it off in time to save the plane, but it was always close. After a few installations you know what to look for and it's almost as natural as checking control directions.

If you absolutely have to have a high gyro rate for 3D, the one in the config tool is fine as long as you don't blast off and start flying fast. The high mode gain is not that much higher than what I use full time, so if there's a big benefit, that's outweighed by keeping it all simple.

As such, on all my planes I run the gains of both of my high/high modes the same at 10. This is good and safe and I've never had one shake like this. If you want that last 1% or 2%, you can experiment on your own, but I prefer the simplicity of turning it on and letting it work it's magic in the background where I don't have to think about that instead of flying the plane.

STICK PRIORITIES

This is either complex or simple, and I only understand it enough to know what I like. Stick priorities adjust how far out in the stick movement the gyro assists you, or when the gyro lets go and gives you no assist. The low mode in the generic 3D template is 40 ailerons/25 elevator/100 rudder.  This works so well that I run that full time on both my high/high modes, though I recently dropped the rudder to 40 so pop tops would be better. On the "generic 3D" template, high mode stick priorities are 100/100/100, which gives you a marvelously stable plane that's useless in tumbles and pop tops. It's great for 3D. but to me it's another complication and my 40/25/40 is still plenty of assist.

So reviewing, it's:

Gains

Ailerons         10

Elevator         10

Rudder           10

Stick Priority

Ailerons      40

Elevator      25

Rudder        40

Most guys are pretty tech savvy, and all they need are the gains and stick priorities, but for the new guys, try to keep it simple.

What It Looks Like

First, you have to go into the TX and assign your gear channel to a three position switch or the gyro part won't work. I like the top switch on the left side, but put it wherever you are comfortable with and can find easily. If you ever have to turn it off, you've got to be able to find it quickly.

We will get into the rest of the TX programming a little later. You can either leave all of that in the Aura and it works fine, but to keep it simple, I do it my way, and I think this works best for the new guys.

Let's start with the set up page. Most things here are self explanatory except the on/off switches. Here I turn every thing off. The quick bind and quick trim features don't apply to Futaba, so I turned then off, but they are useful for Spectrum. Now all of my rates and expos are done in the TX like usual, so follow the plane's manual here.

One benefit here is you don't need to take a laptop to the field for simple adjustments. You program it at home, but you can still change rates, and expo in the TX instead of going home. I finally got a lap top so I could work the sub trims and such, but most everything else can be handled in the TX. For changing gains and stick priorities, you will still need a computer, but we already have those figured out.

Here's what it looks like. 

Click to Enlarge For All Photos

Now we go to the mixing page, but it comes turned off, so if you are using my set up, leave it alone, but check it to be sure.

Now we get into setting up your gains and stick priorities in the "control mode" tab, and you can see those below. This is the "low" mode.

As far as the bounce back adjustments, they are already turned off, so I just leave them alone. Feel free to play with them if you want to tinker, but leaving it off is just one more thing that simplifies everything.

You can see all the gains are 10 on all surfaces. You can tinker for that last 1% or 2%, but I prefer the safety margin of the 10 gain. Around 12 or so you get into shake and it's just not worth risking that. I fly really fast, and coming out of hard dives, and shake here would be terminal. Also notice here the stick priorities are at 40a/25e/40r.

Now we get into a bit of an anomaly. There are only three modes, but four pages. The mid rate shows up, but it simply does not exist. When you go into flight mode (which I use to check everything), it's just not there, and it won't show up when you start flipping switches either. I have no explanation other than it's there if you choose 4 modes on the setup page, but the default is three. I usually set this page to be the same as my high/high settings just to be sure, but for the most part you can ignore the medium mode.

Finally there is high mode, which is identical to my low mode.

    

You will find your end point and sub trim adjustments as well as servo reversing on the servo ports page.

Basically, there were a few things I didn't know what they were, so I left the rest of it alone!

TX Programming

From there, assuming you already set your control directions and sub trim in the Aura, you're done, with the Aura anyway. 

Mostly, programming the TX is like you are used to, except you set your end points to 125%. If you need more, or a fine adjustment, you can use the Aura end points (on the servo ports page). Also, set your sub trims at Zero and adjust those in the Aura.

If you turned off the Aura rates, mixing and expos in the Aura, now you program the TX as the plane's manual suggests and tune from there.

I tried to cover as much as Ii could without being overwhelming. I hope this helps, but if you need more I suggest you try the Extreme Flight EXP Owners Thread on RC Groups.

Also thanks to Rocky at Flex Innovations for great Aura tech support.

Extreme Flight 48" Edge EXP V2__Flight Report

Edges are so well loved that they are near the top of almost everyone's list of favorites. With the straight leading edge (LE) to its wing, the Edge is generally accepted to have the best near stall and post stall manners of all. Recently planes like the Gamebird and Velox have narrowed the stability gap, but the Edge is still the benchmark.

This makes the Edge the obvious choice for a lot of people, especially inexperienced 3D pilots. Harrier flight is the building block of all 3D skills, and the Edge does that better than any of them. When you learn 3D, that's where you start, and you need a plane that is good at it. You need a plane that will stay under you and not give you any nasty surprises, and again, this is where the Edge is the best.

In harrier flight you can get wing rocking, which sees the plane drop one wing, and then the other, back and forth. On some planes it can become so pronounced that the plane will eventually veer of to wherever it wants to go, or at best the whole thing just looks sloppy. Better planes will rock a little, but not enough to see the plane go off course, but it still doesn't looks as good as a dead solid stable, wings level harrier. The Edge doesn't suffer from this at all, which makes it ideal for learning harrier.

I learned harrier on an Extra, but it was a good one that didn't rock too badly. It was almost like a rhythmic little dance. The moment I switched to an Edge though, all of that stopped and my harrier got much better overnight. This is the ideal plane for 3D training.

This stability doesn't make the Edge any less capable of precision, snapping or tumbling maneuvers. The precision of this latest Edge was a little surprising. Generally Edges are good here, but the stiffness of the new V2 construction keeps the plane perfectly aligned and tracking straight. We saw this improvement in the 48 Extra V2, but it seems to have helped the Edge in particular.

The Edge still does all of those just great, though shorter coupled planes like the Velox are a little better at the violent moves. Still, unless you want to tumble one into orbit or something, he Edge is still plenty violent enough,

 The Edge will still wind itself up tighter in a KE spin than any of the others and is probably the best at pop tops. In waterfall, the edge will rotate over and over on it's wing tube, and it's also probably the best at this.

We've done so many Edge reviews it's impossible not to say the same things over and over. If I wanted to be lazy and dishonest I could just copy and paste the 60" Edge V2 flying report because all of the things I said about that plane are pretty much the same I could say about the new 48". Instead, I'll post a link for you to read at your leisure.  Extreme Flight 60 Edge V2__Flight Review

Flight analysis is great, but nothing tells you as much as the flying itself. That's why we have four videos this time instead of our usual two. After a quick shake down and installation hop, I knew what I had. The plane took a notch of up trim, and outside of that I never touched any adjustment on the plane. I checked a few things for tightness, but the way the plane came off the bench is the way I flew it all day. This wasn't me being lazy..... this was a matter of nothing needed changing. The plane came off the bench essentially prefect.

Final piece of advice on this plane, please refer to the Edge build video linked to in the last report. I watched the video a few times and the knowledge gained there really helped make the plane come out as well as it did. Also, follow the set up from the manual, especially the low rates (especially you new guys). You can experiment all you want with set up, but the manufacturers know these planes better than we do and their recommendations are always the best place to start.

 

Edge EXP V2__First Flights.mp4 from Doc Austin on Vimeo.

Edge EXP V2__First Flight II.mp4 from Doc Austin on Vimeo.

Edge EXP V2__First Flight III.mp4 from Doc Austin on Vimeo.

Extreme Flight Edge V2__First Flights IV.mp4 from Doc Austin on Vimeo.

Bonus: 48" Edge V2 in white/red

                 Edge EXP__The Lost Footage.mp4 from Doc Austin on Vimeo.